Avantone Pro CK-6 Large Capsule Cardioid FET Condenser Microphone
Avantone Pro CK-6 Large Capsule Cardioid FET Condenser Microphone
-70% Off$7,222.50
Description
Avantone Pro CK-6 Large Capsule Cardioid FET Condenser Microphone Overview:The CK-6 in its normal stock version uses high grade Polystyrene and Metalized Polypropylene capacitors in the audio path. This represents our commitment to quality as these normally are the type of “upgrade” components that are implemented by microphone modders/hot-rodders! Any studio can proudly offer the CK-6 for instrumental and vocal mikingIt exudes class visually as well as sonically.Manufactured using the finest materials yielding a very solid feel, superb structural integrity and rugged reliability. The versatile CK-6 mic is able to produce professional results with a clean sonic character.The included Custom Retro Shockmount is superb in allowing a precise positioning of the mic while inhibiting the transfer of unwanted vibrations up into the mic. This isolation allows for superior professional results.The CK-6 has separate -10 dB pad & 80 Hz LF roll off switches….The -10dB attenuation switch can be engaged when miking very high SPL sources to keep from overloading the electronics. The 80Hz high-pass filter switch can be engaged to reduce rumble and to keep unwanted low frequencies from “muddying up” the track.Uses Include: Studio vocals, acoustic guitar, mandolin, drum overheads, piano, etcBox Contents:
- Avantone CK-6 Cardioid FET Microphone
- Avantone Custom Retro Shockmount
- Elegant padded genuine wooden Mic box
- Padded Aluminum storage / travel case
- Owners Manual
Specifications:
- Type: True Transformerless Condenser
- Polar Pattern(s): Cardioid
- Capsule: Single-sided 32mm center-terminated gold-sputtered Mylar (6 micron)
- Frequency Response: 35-20,000 Hz +/- 3.5dB
- Output Impedance: <=200 Ohms
- Maximum SPL: 136dB (0.5% THD @1000Hz)
- Equivalent Noise Level: <17dB
- Output Connector: Male XLR 3-pin
- High-Pass Switch: 80 Hz 6dB/octave
- Attenuation Switch: -10 dB
- Power Requirement: Standard 48 Volt Phantom / 5mA
- Dimensions: 155mm x 46mm
- Weight: .4 kg / .9 lb
- Finish: Polished Nickel trim / Metallic Cabernet Red Body
Made in China